Skip to content

Washing

Washing instructions

Before washing your textile gloves, make sure to remove all electronics.

We recommend hand washing the textile gloves, and air drying them afterwards.

The textile gloves can be machine washed at up to 60°C / 140°F, and tumble dried at a medium temperature.

Removing electronics

  1. First remove the interchangeable batteries from the Top Module, by squeeze the sides of the battery.

  1. While squeezing, pull the battery to remove it from the Top Module.

  1. Pull the latch to unlock the Top Module.

  1. Rotate the Top Module away to uninstall it from the Sensor glove.

  1. Open the velcro on the side of the glove.

  1. Open both velcro straps.

  1. Fold open the glove.

  1. Gently press down onto the fingertip sensors to detach them from the fabric.

  1. Carefully pull the sensor cables to remove all sensors from the glove.

  1. Detach the glove module base by pulling the velcro apart.

With all electronics removed, the textile gloves can now be washed.

Installing electronics

  1. Make sure the textile is fully dry before installing the electronics.

  1. Fold open the glove.

  1. Insert the fingertip sensors into the sensor cable tunnels inside the glove.

  1. Guide the fingertip sensors through the sensor cable tunnels inside the glove.

  1. Guide the fingertip sensors into the sensor cut-outs.

  1. Press down around the fingertip sensors to secure the sensor into the cut-outs.

  1. Align and attach the glove module base to the velcro patch.

  1. Close the glove.

  1. Secure the velcro on the side of the glove.

  1. Align the glove module base cut-out.

  1. Press down to secure the fabric around the glove module base cut-out.

  1. Align the the Top Module using the hinge.

  1. Rotate the Top Module downwards onto the latch.

  1. Make sure the latch snaps into place, tightly securing the Top Module.

  1. Slide the battery into the Top Module until it locks into place.

Your Metagloves Pro is now fully reassembled and ready for use.